8-1

Chapter 8

Using the Net to Media Table
The Net To Media Table window; modifying an entry
The Net to Media Table is used by MIB-II devices to map IP addresses to physical
addresses when transmitting an IP datagram for devices on each network
segment directly connected to the monitored device. The table includes the media
type for each port interface, as well as the map type through which the table entry
is obtained. MIB-I devices do not support the Net to Media Table.
To open the Net to Media Table window from the System Group window:
1. Click on the Other Groups button. The Other Groups drop-down menu
displays.
2. Click NetToMedia Table. The Net to Media Table window, Figure 8-1, opens.
Figure8-1. Net to Media Table Window