8-3Using the Net to Media Table2. Enter the desired changes in the Physical Addr field within the Values set
for area.
3. Click on the option button corresponding to the way you want that entry
mapped into the database (other, invalid, dynamic, or static). Selecting
invalid as the mapping type disables the selected translation entry.
4. Click Set. Status information displays above the command buttons and a
confirmation window opens; if the set succeeded, the changes displays in the
list.
Adding Entries to the Net to Media Table
You can make static entries to the ARP cache; static entries remain in the ARP
cache until you remove them.
1. Click Clear. This allows you to enter values in the Values set for section.
2. Enter the port number, physical address, and IP address in the appropriate
fields.
3. Click on the option button corresponding to the way you want that entry
mapped into the database (other, invalid, dynamic, or static).
4. Click Set. Status information displays above the command buttons and a
confirmation window opens; if the set succeeded, the new entry displays in
the list.
NOTE
When an entry is highlighted the interface description is displayed in the Value s set for
section of the window, (e.g., Ctron SEHI EnetPort).
NOTE
If the Physical Address is entered in an incorrect format, an “Invalid Ethernet
Address” message opens. Enter the address in the correct XX-XX-XX-XX-XX-XX
hexadecimal format. If the IP Address is entered in an incorrect format, an “Invalid IP
Address” message opens. Enter the address in the correct XXX-XXX-XXX-XXX
format.