If the other device does not have an unused Uplink
port, make the connection with a normal straight-
through cable from the Uplink port on the switch to any
normal crossed port on the hub. Alternatively, if you
have a crossover cable you can save the Uplink ports
for other connections and make this one from a
crossed port to another crossed port.
Figure 3-2. Switch connected to a normal (non-Uplink) port on a
hub or switch using a straight or crossover cable
10BASE-T Device
For a 10BASE-T device, the Switch’s LED indicators
should display the following:
• 100M LED speed indicator is OFF.
• Link/Act indicator is ON.
100BASE-TX Device
For a 100BASE-TX device, the Switch’s LED indicators
should display the following:
• 100M LED speed indicator is ON.
• Link/Act is ON.
9033693-01 42