Deciding Where to Locate Your Stove, Installation

3. DECIDING WHERE TO LOCATE YOUR STOVE

FREESTANDING:

•Locate the stove in a large and open room that is centrally located in the house. This will optimize heat circulation and comfort.

•The stove should be located out of traffic, away from furniture and draperies and should have sufficient access for its safe operation and maintenance.

•The flow of convection air can not be blocked

•The stove can be installed on any combustible flat surface providing that it is installed on a metal or wood panel extending the full width and depth of the appliance.

•Check the stove and flue system clearance requirements. Locate a position where the flue system of the stove can be properly installed without damaging the integrity of the building. e.g. cutting through a wall or ceiling joist.

•Locate the stove where it can be accessed by a gas supply line.

•Note: If the stove is equipped with the optional convection fan, the electrical cord is only 8 ft. (2.4 m) long.

FIREPLACE INSERT

•The fireplace insert model can only be located in an existing wood burning steel or masonry fireplace. The existing chimney must be lined using a Simpson Dura Vent sealed co-linear vent system using the Envirogas kit 828-135 (DV insert / co-linear adapter).

4. ASSEMBLY INSTRUCTIONS

INSTALLATION

Remove the packaging from the appliance, pedestal or surround panels and burner controls, check to make sure there is no damage. Carefully check the glass door. Do not use the unit if it is damaged. In the event damage is found, please report it to both the courier and your dealer as soon as possible.

•Open the two hinged side panels, open the door by undoing the bolt, located on the right side (1/2 inch wrench).

•Remove the log and ember set from the firebox.

•Remove the two hold down clamps that attach the stove to its pallet ( #2 Robertson screwdriver ). These are hooked through the square openings immediately behind the side panels on each side of the unit.

BOTTOM VIEW

FREESTANDING

•Place the stove on its back, on the pallet.

•Back off the 4 screws ( 5/16 hex head located on the base) 2 turns. Place the pedestal so that the screws in the base of the stove engage the keyholes in the pedestal. Check to see that all screws are locked, then tighten with a 5/16 socket wrench.

• Return unit to upright position. Complete the installation. Install the burner

controls, log set, embers and optional fan kit as per the instructions in the upcoming PEDESTAL MOUNTING SCREWS sections.

828 MH, 828 DV.FS, 828 DV.INS specifications

The Enviro 828 series, including the 828 DV.INS, 828 DV.FS, and 828 MH models, represents a breakthrough in environmental technology, catering to both residential and commercial needs. These innovative systems are designed for efficiency, sustainability, and advanced functionality, making them suitable for various applications.

One of the standout features of the Enviro 828 series is its dual variable input system (DV.INS and DV.FS), which allows users to customize their energy consumption based on real-time demands. This technology not only optimizes performance but also enhances energy efficiency, leading to significant cost savings on utility bills. The adaptive modulation feature intelligently adjusts the output based on workload, ensuring that the system operates only as needed.

Another hallmark of the Enviro 828 series is its commitment to eco-friendliness. Incorporating state-of-the-art filtration technology, these units minimize emissions and reduce carbon footprints. They are equipped with high-efficiency particulate air (HEPA) filters, which are designed to capture even the smallest airborne particles, making them ideal for environments where air quality is a priority.

The 828 MH model further distinguishes itself with its multi-zone capabilities, allowing for distinct heating and cooling settings across different areas of a building. This feature is particularly beneficial in larger homes or office spaces, where temperature preferences may vary significantly from one room to another. Users can enjoy personalized comfort while maintaining overall energy efficiency.

Moreover, the Enviro 828 series employs advanced connectivity options, including smart home integration. Users can monitor and control their systems remotely through mobile applications, enabling real-time adjustments and stats tracking. This connectivity feature not only enhances user convenience but also allows for predictive maintenance alerts, ensuring longevity and operational reliability.

In summary, the Enviro 828 DV.INS, 828 DV.FS, and 828 MH models offer a perfect blend of efficiency, customization, and environmental consciousness. With their innovative technologies, such as dual variable input systems, advanced filtration, multi-zone capabilities, and smart connectivity, these units stand out as top choices for those seeking sustainable solutions in heating and cooling systems. Investing in an Enviro 828 model empowers users to prioritize comfort, efficiency, and environmental stewardship.

Enviro 828 MH Deciding Where to Locate Your Stove, Assembly Instructions, Fireplace Insert

Models: 828 MH 828 DV.FS 828 DV.INS