Manuals / Enviro / Household Appliance / Stove

Enviro C-10629 owner manual Introduction, Store pellets at least 36 1 m away from the pellet stove

Models: C-10629

1 14
Download 14 pages 4.79 Kb
Page 3
Image 3

Introduction

* This manual is designed for the home owner in conjunction with the technical manual. *

PELLET QUALITY:

Pellet quality is important, please read the following:

Your enviro pellet stove has been designed to burn wood pellets only. Do not use any other type of fuel, as this will void any warranties stated in this manual.

The performance of your pellet stove is greatly affected by the type and quality of wood pellets being burned. As the heat output of various quality wood pellets differs, so will the performance and heat output of the pellet stove.

CAUTION: It is important to select and use only pellets that are dry and free of dirt or any impurities such as high salt content. Dirty fuel will adversely affect the operation and performance of the unit and will void the warranty.

ASH: The ash content of the fuel and operation of your stove will directly determine the frequency of cleaning. The use of high ash fuels may result in the stove needing to be cleaned daily. A low ash fuel may allow longer intervals between cleaning.

CLINKERING: [clinkers are silica (sand) or other impurities in the fuel that will form a hard mass during the burning process]. This hard mass will block the air flow through the Burn Pot Liner and affect the performance of the stove. Any fuel, even approved types, may tend to clinker. Check the Burn-Pot Liner daily to ensure that the holes are not blocked with clinkers. If they become blocked, remove the liner (when the unit is cold) and clean/scrape the clinkers out. Clean the holes with a small pointed object if required. Refer to the section Routine Cleaning and Maintenance.

PELLET FEED RATES: Due to different fuel densities and sizes, pellet feed rates may vary. This may require an adjustment to the slider damper setting or to the auger feed trim setting on Low.

Since Sherwood Industries Ltd. has no control over the quality of pellets that you use, we assume no liability for your choice in wood pellets.

Store pellets at least 36” (1 m) away from the pellet stove.

AUTOMATIC SAFETY FEATURES OF YOUR PELLET STOVE:

Your pellet Stove has the following safety features:

A. The stove will shut off when the fire goes out and the exhaust temperature drops below 120°F (49°C).

B. The stove has a high temperature safety switch. If the temperature on the hopper reaches 200°F (93°C), the auger will automatically stop and the stove will shut down when the exhaust temperature cools. If this happens, call your local dealer to reset the 200°F (93°C) high limit switch. ALSO FIND

THE REASONS WHY THE UNIT OVERHEATED.

C. If the power goes out, the unit will stop running. When the power comes back on, the stove will not restart unless the exhaust temperature is still above 120°F (49 °C) or the unit is in the ON/OFF thermostat mode.

3

Page 2 Page 4
Page 3
Image 3
Enviro C-10629 Introduction, Store pellets at least 36 1 m away from the pellet stove, Reasons WHY the Unit Overheated
Page 2 Page 4

C-10629 specifications

Enviro C-10629 is an innovative product designed for effective environmental management and sustainability solutions. This versatile formulation is particularly well-regarded for its ability to combat a wide range of environmental challenges, making it an essential tool for various industries, including agriculture, waste management, and soil remediation.

One of the main features of Enviro C-10629 is its biodegradable nature, which aligns with modern ecological practices. This characteristic not only helps minimize environmental impact but also ensures that the product can be safely used in sensitive ecosystems without leaving harmful residues. The formulation is designed to break down into non-toxic by-products, thereby contributing to a circular economy.

The technology behind Enviro C-10629 is based on advanced microbial and enzymatic activity. This allows the product to work in synergy with the natural processes found in soil and water environments. By harnessing the power of beneficial microorganisms, Enviro C-10629 enhances nutrient availability and improves soil health, facilitating robust plant growth and crop yields.

In terms of characteristics, Enviro C-10629 exhibits excellent compatibility with other agricultural inputs, which allows it to be easily integrated into existing practices. This compatibility ensures that farmers and land managers can use it in conjunction with fertilizers and other soil amendments without any adverse reactions. As a result, individuals can maximize the effectiveness of their agricultural inputs while promoting environmental sustainability.

Furthermore, Enviro C-10629 is designed to be user-friendly and requires minimal application effort. With an effective delivery system, it can be applied through various methods, including spraying, drenching, or mixing with irrigation systems. This ease of use ensures that users can implement the product without extensive training or specialized equipment.

Overall, Enviro C-10629 stands out as a cutting-edge solution for environmental challenges. Its biodegradable composition, advanced microbial technology, compatibility with other agricultural practices, and user-friendly application methods make it an essential product for those seeking to promote sustainability while maintaining productivity. As industries increasingly prioritize eco-friendly solutions, Enviro C-10629 represents a significant step forward in achieving these goals.