Introduction

ASHES: Disposed ashes should be placed in a metal container with a tight-fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal. The ashes should be retained in the closed container until all cinders have thoroughly cooled before disposing of them.

ELECTRICAL: The use of a surge protected power bar is recommended. The unit must be grounded. The grounded electrical cord should be connected to a standard 120 volts, 60 hertz electrical outlet and also must be accessible. If this power cord should become damaged, a replacement power cord must be purchased from the manufacturer or a qualified ENVIRO dealer. Be careful that the electrical cord is not trapped under the appliance and that it is clear of any hot surfaces or sharp edges. This unit’s maximum power requirement is (4.1 Amps) 500 watts.

GLASS: Do not abuse the glass by striking or slamming the door. Do not attempt to operate the stove with broken glass. The stove uses ceramic glass. Replacement glass must be purchased from an ENVIRO dealer. Do not attempt to open the door and clean the glass while the unit is in operation or if glass is hot. To clean the glass, use a soft cotton cloth and mild window cleaner, gas or wood stove glass cleaner, or take a damp paper towel and dip into the fly ash. This is a very mild abrasive and will not damage the glass.

FLAMMABLE LIQUIDS: Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or “freshen up” a fire in the heater. Keep all such liquids well away from the heater while it is in use.

SMOKE DETECTOR: Smoke detectors should be installed and maintained in the structure when installing and operating a pellet burning appliance.

OPERATION: The ash pan and door must be closed securely for proper and safe operation of the pellet stove. Also ensure all gaskets on the door are checked and replaced when necessary.

KEEP ASH PAN FREE OF RAW FUEL.

DO NOT PLACE UNBURNED OR NEW PELLET FUEL IN ASH PAN. A fire in the ash pan may occur.

If you have any questions with regards to your stove or the above-mentioned information, please feel free to contact your local dealer for further clarification and comments.

SINCE SHERWOOD INDUSTRIES LTD. HAS NO CONTROL OVER THE INSTALLATION OF YOUR STOVE, SHERWOOD INDUSTRIES LTD. GRANTS NO WARRANTY IMPLIED OR STATED FOR THE INSTALLATION OR MAINTENANCE OF YOUR STOVE. THEREFORE, SHERWOOD INDUSTRIES LTD. ASSUMES NO RESPONSIBILITY FOR ANY CONSEQUENTIAL DAMAGE(S).

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

5

Page 4 Page 6
Page 5
Image 5
Enviro C-11114, C-10808, 50-1385 owner manual Keep ASH PAN Free of RAW Fuel
Page 4 Page 6

C-10808, C-11114, 50-1385 specifications

Enviro 50-1385, C-11114, and C-10808 are innovative formulations designed for various applications in the field of environmental engineering and industrial processes. Each of these formulations boasts unique main features, technologies, and characteristics that contribute to their efficacy and versatility.

Enviro 50-1385 is a cutting-edge product known for its exceptional biodegradability and low toxicity. It effectively addresses waste management and pollution reduction in industrial settings. This formulation is characterized by its ability to degrade organic compounds efficiently, making it ideal for use in wastewater treatment facilities. The advanced microbial technology incorporated in Enviro 50-1385 enhances its performance, ensuring that harmful pollutants are broken down, thus reducing environmental impact. Additionally, its formulation is designed to work effectively across a wide range of pH levels and temperatures, providing reliable performance in diverse conditions.

C-11114 stands out for its robust chemical composition, making it suitable for heavy-duty industrial cleaning and degreasing applications. This formulation features a blend of surfactants and solvents that provide powerful cleaning action while remaining environmentally friendly. The unique surfactant technology in C-11114 allows it to penetrate and lift grease and oils quickly, making it an ideal choice for manufacturers seeking effective cleaning solutions without compromising on environmental safety. Its low VOC (volatile organic compounds) content further aligns with modern regulatory requirements, making it a responsible choice for businesses focusing on sustainability.

C-10808 is designed for use in environmentally sensitive areas, combining effectiveness with safety. This formulation features advanced encapsulation technology, which allows the active ingredients to maintain potency while minimizing direct exposure during application. C-10808 is especially effective in controlling odors and removing contaminants in air and water systems, making it an essential tool in environmental remediation projects. The user-friendly application method, combined with its fast-acting properties, makes C-10808 a preferred choice for field technicians and environmental engineers alike.

In summary, Enviro 50-1385, C-11114, and C-10808 offer distinct advantages for various industrial and environmental applications. With their innovative technologies and sustainable characteristics, these formulations represent a significant advancement in providing effective solutions while prioritizing environmental safety. Each product is thoughtfully developed to meet the evolving needs of industries committed to sustainability and responsible practices.
Top Page Image Contents