Installation

EXTERIOR MOUNTED EXHAUST BLOWER (20-070):

The Mini can be equipped with an externally mounted exhaust blower. This optional kit includes all components necessary to install the exhaust blower on any vertical wall surface.

Choose a location for your stove that meets the requirements stated in your manual and allows installation with the least amount of interference with house framing, plumbing, wiring, etc.

Included in the Exterior Mounted Exhaust Blower Kit are: 1 - Exhaust blower housing box.

1 - Blower cover plate.

1 - Hardware bag

Figure 19: Exterior Blower Kit.

 

1.

Remove the left hand cabinet side by removing the two

 

 

(2) screws down the front. Loosen the three screws on the

 

 

back of the cabinet side and remove panel.

 

2.

Loosen the six (6) screws that hold the back grill in place.

 

 

Lift the back grill off the screws.

 

3.

Disconnect the Exhaust blower wires from the wire

 

 

harness. Remove the exhaust blower motor from the

 

 

housing; six (6) screws. Cover hole in housing with cover

 

 

plate provided (see Figure 20).

Figure 20: Exterior Blower Kit.

4. Remove the cover from the exhaust blower housing box.

 

5.

Install the exhaust blower housing box into the pipe placed

 

 

through the wall thimble, seal with high temperature

 

 

silicone. Fasten the box to the wall with (4) four screws,

 

 

seal edges of box to wall with clear silicone.

 

6.

Drill a hole through the wall thimble plate for the electrical

 

 

wires. Pass the armored cable through the wall thimble.

 

 

Use the strain relief provided. Do not pass cable

 

 

through vent hole.

 

7. Install the Exhaust Blower motor into the external exhaust

 

 

blower housing box. Make the electrical connections to the

 

 

wire harness and exhaust blower.

 

8.

Replace the cover on the Exhaust Box and the back grill of

 

 

the stove and ensure the screws are tightened down.

Figure 21: Exterior Blower Kit cut-through.

9.

Install vertical pipe as instructed in appropriate section.

 

 

15

Page 15
Image 15
Enviro C-10985 technical manual Through vent hole, Exterior Blower Kit

C-10985 specifications

Enviro C-10985 is a cutting-edge environmentally friendly chemical formulation specifically designed for industrial cleaning and degreasing applications. Its introduction marks a significant advancement in sustainable chemical solutions, catering to industries that prioritize safety and environmental impact.

One of the main features of Enviro C-10985 is its non-toxic composition. Unlike traditional solvents that often contain hazardous volatile organic compounds (VOCs), this innovative formula is derived from renewable sources, making it safe for users and the environment. The low-VOC content minimizes air pollution and reduces health risks associated with exposure to harmful chemicals, aligning with stringent safety regulations and guidelines.

The technology behind Enviro C-10985 incorporates advanced surfactant systems that enhance its cleaning efficacy. These surfactants are designed to penetrate and lift grease, oil, and dirt from various surfaces. The product can be employed on metals, plastics, and other materials, ensuring versatility in industrial applications. The biodegradable nature of these surfactants further emphasizes the product's eco-friendliness, as it breaks down without leaving harmful residues.

Enviro C-10985 is also formulated to be user-friendly. It comes in a concentrated solution that can be diluted to meet the specific needs of various cleaning tasks, reducing both waste and transportation costs. The product’s formulation is compatible with various application methods, including pressure washing, spray application, and manual cleaning, making it suitable for a wide range of operational contexts.

Another characteristic of Enviro C-10985 is its performance at varying temperatures. It retains its cleaning power in both cold and hot water, making it adaptable to different cleaning scenarios. This feature is particularly beneficial in industries where temperature controls vary significantly.

Additionally, Enviro C-10985 is designed to mitigate corrosion and protect surfaces during the cleaning process, contributing to the longevity of equipment and machinery. The formulation includes corrosion inhibitors that safeguard metal surfaces from rust and degradation, ensuring consistent performance over time.

In conclusion, Enviro C-10985 is an exemplary solution for businesses seeking effective, safe, and environmentally responsible cleaning products. Its unique features, advanced technology, and compatibility with multiple applications make it an invaluable asset in modern industrial cleaning regimes.