Routine Maintenance and Service

Annually check to ensure that your Venting system is clear.

Periodically check the pilot and burner. Check to see that all the burner ports are clean and clear. Check the pilot head for blockage. Check to ensure the pilot flame is blue with no or very small yellow tips.

OPENING THE DOOR

Turn unit off and wait until the appliance has cooled down.

1.Open the right hand hinged side flap, which will expose a door fastener. Using a 1⁄2” wrench, loosen the fastener.

2.Due to the shape of the bay window door. You must also open the left-hand side flap before attempting to open the door.

3.If the door must be removed open the door and lift the door pins out of the hinges (see figure 19).

���� ��

��� ������ �����

Figure 19: Removing the Door.

4. Ensure the door is properly fastened after cleaning before attempting to re-light the appliance.

CLEANING THE GLASS (Allow the glass to cool before cleaning.)

It will be necessary to clean the ceramic glass periodically. During a cold start up, condensation will sometimes form on the glass. This is a normal condition with all gas fireplaces and stoves. However, this condensation can allow dust and lint to cling to the glass surface. Initial paint curing of the appliance can leave behind a slight film on the glass. This is a temporary problem. It is therefore recommended that the glass be cleaned initially after about the first four hour of use.

Depending upon the amount of use, cleaning should be required no more than two or three times per season.

To clean the door, use a mild glass cleaner and a soft cloth or a glass cleaner available from your Enviro dealer. Abrasive cleaners will damage the glass.

TO REPLACE DOOR

The glass in this appliance is an integral part of the door assembly. If the glass is damaged or broken a replacement inner door with glass assembly must be purchased.

The glass in this appliance is ceramic. If the glass is damaged or broken a factory door with glass replacement must be used.

Remove the door with glass, a new door assembly must be purchased from an ENVIRO dealer (part #: EC-063).

Do not use a substitute materials; it will void the warranty.

CLEANING THE INSIDE OF THE FIREBOX

1.Turn off the unit and allow it to cool down completely.

2.Remove the logs carefully from the firebox. Gently remove the embers and place on a piece of paper towel, until ready to replace.

3.Vacuum the bottom of the firebox thoroughly. Carefully clean off any dust on the logs and remove any lint from the main burner and pilot burner.

4.After carefully replacing the log and embers in their correct positions (see Secondary Installation - Installation of Log Set and Embers), and the door has been resealed, re-light the pilot, following the instructions on the lighting label attached to the unit.

CLEANING PLATED SURFACES:

It is important to note that fingerprints and other marks can leave a permanent stain on plated finishes. To avoid this, give the face a quick wipe with denatured alcohol on a soft cloth BEFORE lighting the fireplace. Never clean the face when it is not cool. Do not use other cleaners as they may leave a residue, which can become permanently etched into the surface.

16

Page 15 Page 17
Page 16
Image 16
Enviro EG40-071 Routine Maintenance and Service, Opening the Door, To Replace Door, Cleaning the Inside of the Firebox
Page 15 Page 17

EG40-071 specifications

The Enviro EG40-071 represents a cutting-edge advancement in eco-friendly technology, engineered for both performance and sustainability. This device is a perfect embodiment of modern environmental solutions, making it an ideal choice for various applications ranging from industrial processes to residential use.

One of the standout features of the Enviro EG40-071 is its high efficiency. The unit utilizes advanced energy management systems that optimize power consumption while delivering impressive output. With a focus on reducing environmental impact, the EG40-071 is designed to operate with minimal energy waste, thereby lowering operational costs and promoting greener practices.

Moreover, the technology integrated into the Enviro EG40-071 is state-of-the-art. It includes sophisticated monitoring systems that provide real-time data on performance metrics. This feature allows users to track energy usage, emissions, and operational efficiency, enabling informed decision-making and streamlined performance. The device is also equipped with IoT capabilities, facilitating remote access and management through connected devices. This modern connectivity feature means users can monitor and control the unit from anywhere, enhancing convenience and overall functionality.

In terms of design, the Enviro EG40-071 boasts a robust and compact structure, making it suitable for various installation settings. Its modular design enables easy integration into existing systems, while the durable materials used in its construction ensure longevity and reliability even in challenging environments. Additionally, the device adheres to stringent safety standards, providing peace of mind for users.

One of the key characteristics of the Enviro EG40-071 is its versatility. It can be utilized in diverse applications, including HVAC systems, industrial machinery, and renewable energy projects. This adaptability makes it a valuable asset for businesses and households striving to reduce their carbon footprint. Furthermore, the EG40-071 contributes to compliance with environmental regulations, allowing users to align with sustainability goals and practices.

In conclusion, the Enviro EG40-071 combines advanced technology, efficiency, and versatility, making it a significant player in the realm of eco-friendly solutions. With features that support energy management and monitoring, alongside a robust and modular design, it stands out as a key component for those looking to embrace sustainable innovation in their operations. The Enviro EG40-071 is not just a product; it is a commitment to a greener future.
Top Page Image Contents