Before You Operate the Monitor EN-5200e

Connecting the Wires Using the Power Cord Supplied

1.Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.

2.Connect the power cord into your LCD monitor's Power Adapter.

3.Connect the Power Adapter to your monitor.

4.Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip.

Caution: Make sure the power cord is the correct type that is required in your area. This LCD monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage areas (no user adjustment is required).

If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

EN-5200e

6

31MY02

Page 6
Image 6
Envision Peripherals EN-5200E user manual Connecting the Wires Using the Power Cord Supplied