Envision Peripherals EN-8100E user manual Connecting the Wires Using the Power Cord Supplied

Before You Operate the Monitor EN-8100e

Connecting the Wires Using the Power Cord Supplied

1.Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.

2.Connect the power cord into the power adaptor.

3.Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip.

4.Connect the power adaptor into the DC IN socket on the back of the monitor.

Caution: Make sure the power cord is the correct type that is required in your area. This LCD monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage areas (no user adjustment is required).

If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

EN-8100e 6 v1_081502