15
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or top panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off:
Press POWER button under the LCD TV, or press the POWER button on your remote control to
turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Selecting input source
To select the required input source:
Press the INPUT button on the remote control, Use ▲▼ to select the required input source
between TV, AV, S-Video, YPbPr, VGA, and HDMI.
To confirm the selection, press ENTER.
Volume Adjusting
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of the
information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it
is in.)
＊ The picture here shows an example of the INFO screen in a DTV source.
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the channel you
are watching will be displayed on the screen.
Press the ◄ or ► button to scroll up or down the channels. Each time you pause at a channel, the
program list will update with the program schedule for that channel.
Press the GUIDE button to exit this feature.