6Load Paper
1 Place a stack of paper against the right side of the feeder.
2 Slide the left edge guide against the paper.
7 Installll the Software
1 Make sure the EPSON 1000 ICS is not connected to your computer, then turn on your computer.
Note: If your EPSON 1000 ICS is turned on and connected to your computer, you may see several New Hardware Wizard screens. Click Cancel for each of these screens and disconnect your EPSON 1000 ICS. You can’t install your software that way.
5 When you see this screen telling you to connect your EPSON 1000 ICS, make sure it is turned on, then remove the sticker from the USB port on the back. Connect
the 
square end of the USB cable to your EPSON 1000 ICS’s USB port, then
connect the 
flat end of the cable to your computer’s USB port.
Note: After you plug in your EPSON 1000 ICS, Windows displays several messages as it detects your device.
6 Continue following the instructions on the screen to install the rest of your software.
Note: It will take several minutes to install the remaining software. Don’t cancel the installation.
7 When you see this screen, follow the steps to install ArcSoft™ PhotoImpression™.
8 When you see this screen, follow the steps to begin installing EPSON Smart Panel™.
8Your Firsti Scan
1 Raise the document cover and place a photo
2 Position the photo so the horizontal and vertical edges are aligned with the guides on the top and left sides of the document table.
3 
EPSON Smart Panel icon on your desktop.
4 You see EPSON Smart Panel. Click the Scan to File button.
Click to start
scanning.
Smart Panel starts EPSON TWAIN, which automatically scans your photo.
5 After your photo is scanned, the Scan to File dialog box opens. If you want to scan another photo, place it on the document table glass, close the cover, and click Scan More. Otherwise, click Finish.
2 Insert your EPSON 1000 ICS
3 The Software Installation screen opens automatically. Click Install.
Note: If the install screen doesn’t open automatically, do the following:
for Windows® XP: click Start > 
My Computer. Then
the EPSON
for Windows 98, Windows 2000, or Windows Me:
My Computer. Then 
EPSON
4 When you see the license agreement, read it and click Agree, then follow the instructions on the screen to install EPSON TWAIN and your printer driver.
continue 
9 The Smart Panel installation also launches separate installations for EPSON Copy Utility, EPSON Photo Print, and ScanToWeb. These are necessary components of
EPSON Smart Panel. Follow the steps on screen and do not cancel their installations.
10 When you see the final screen, make sure the EPSON 1000 ICS is still on and paper is loaded. Click Print Test Page to test your printer driver.
Click to print a test page.
Note: If the test page doesn’t print, see the Problem Solving section of your Basics book.
11 Click Register and follow the instructions on the screen to register your product. At the last screen, click Done.
12 Click Exit, then click Yes and remove the
6 Select a folder and file format, then click Save to save your file.
Congratulations! You’ve finished setting up your EPSON 1000 ICS and scanning your first photo. Now you can see you Basics book to print your photo. Your Basics book also explains copying and scanning and includes other important information.
EPSON is a registered trademark and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2002 by Epson America, Inc. 
Printed on recycled paper. 4/02
Printed in USA