7.Next you reset the TONER setting. Three messages flash in rotation on the display:
NEW CARTRIDGE?
YES, PRESS RESET
NO, PRESS CONTINUE.
8.Press RESET to change the TONER setting to full.
9.Gently press down on the printer cover until it clicks shut.
Please note: If you replace the cartridge when more than 20% toner is left, the three rotating messages do not appear. Instead COVER OPEN E** F (two or more asterisks) appears. Use the SelecType Level 2 TONER option to change the TONER setting to full.
If you do not change the TONER setting to full after replacing the imaging cartridge, the TONER message indicates the wrong amount of toner left. Also NEW CARTRIDGE? appears even if the toner level is full.
Note:
Each time you replace the imaging cartridge, you should print a feature print to be sure the print quality is satisfactory and that you installed the cartridge properly. See “Test printing” earlier in this guide.
14 Maintenance