4 Attaching the power cord

1.Make sure the power switch at the top right of the printer is turned off.

2.Insert the power cord into the back of the printer. Then plug the other end into a properly grounded outlet.

5Test printing

1.Make sure the imaging cartridge is installed. Turn on the printer. Several messages appear as the printer performs internal tests. After about 35 seconds, the READY message

appears.

2.Press the LEVEL 2 button to enter SelecType Level 2.

3.Press ‘I until FEATURE PRINT appears on the display.

4.Press ) twice holding down the button until the display begins to flash to print the feature print.

5.After the feature print is complete, press the EXIT button to exit SelecType.