Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
Press the Auto button on the remote control to optimize the image signal.
Try adjusting the image position using the Position menu setting.
Press the Aspect button on the remote control to select a different image aspect ratio.
If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button to return to a
full display.
Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
Place the projector directly in front of the center of the screen, facing it squarely, if possible.
If you adjusted the projector height using the projector feet, press the keystone buttons on the
projector to adjust the image shape.
Turn on automatic keystone adjustments using the projector's menus.
Adjust the Quick Corner setting to correct the image shape.
Parent topic: Solving Image or Sound Problems
Related references
Projector Feature Settings - Settings Menu
Related tasks
Correcting Image Shape With the Horizontal Keystone Slider
Correcting Image Shape With the Keystone Buttons
Correcting Image Shape With Quick Corner
107