Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:
Check the cables connecting your computer or video source to the projector. They should be:
Separated from the power cord to prevent interference
Securely connected at both ends
Not connected to an extension cable
Check the settings on the projector's Signal menu to make sure they match the video source. If
available for your video source, adjust the Progressive and Noise Reduction settings.
Select a computer video resolution that is compatible with the projector.
If you are projecting from a computer, press the Auto button on the remote control to automatically
adjust the Tracking and Sync settings.
If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to
improve image quality.
If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Related tasks
Displaying From a PC Laptop
Displaying From a Mac Laptop
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
Adjust the image focus.
Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
108