EPSON Stylus 1500
6.Open both sprocket covers.
7.Make sure the printable side of the paper is up. Then fit the first four holes of the paper over the sprocket pins and close the sprocket covers.
8.Position the left sprocket unit so its right edge is aligned with the arrow mark on the printer. The arrow mark indicates the left edge of the printable area. Then lower the
9.Slide the right sprocket unit to remove any slack in the paper. Then lower the
10.Reattach the manual feed guide to the printer. Match the holes of the guide to the pins on both sides of the printer and push until they click into place.
11. Lower both page eject guides.
| TITLE |
|
EPSON AMERICA, INC. |
|
12.Make sure the rear edge guide of the paper support is pushed under the output tray to prevent a paper jam.
13.When the printer receives data, it advances the continuous paper to the loading position and starts printing.
Removing Continuous Paper
Follow these steps to remove continuous paper from the printer:
1.After you have finished printing a page of continuous paper, press the Load/Eject button. The printer advances the paper to the
Note:
If the auto tear off feature is on, you can skip step 1 because the printer advances the paper perforation to the
2.Tear off the printed pages.
3.Press the Load/Eject button. The printer feeds the continuous paper backward to the
Switching Between Continuous Paper and Single Sheets
When using the tractor feeder, you can easily switch between
Switching to Single Sheets
To switch from continuous paper to single sheets, follow these steps:
1.If any printed sheets remain in the printer, tear off the printed pages.
2.Press the Load/Eject button. The printer feeds the continuous paper backward to the
c Caution:
Always tear off paper before
Never
Ink Jet Printers | 1/96 | EPSON Stylus 1500 - 15 |