note
The image will be slightly smaller after adjusting. If it’s important to maintain the correct aspect ratio, use the menu system to perform keystone correction, then use the remote’s Resize button to adjust the aspect ratio. See page 30.
Using Keystone Correction
To adjust your image when it is wider on the top or bottom, do the following:
■Press one of the two triangular buttons on the projector’s control panel, as shown below. Continue pressing the button until you are satisfied with the shape of the image.
■Or press the Menu button on the remote control or projector, select the Setting menu, and press Enter.
From the Setting menu, select Keystone and press Enter. Use the 
pointer button on the remote control to adjust the keystone setting as needed.
If the image becomes uneven, decrease the sharpness setting. (See page 47.)
22Displaying and Adjusting the Image