Cleaning the Air Filter and Vent
Clean the air filter and air intake vent after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector.
Follow these steps:
1.Turn off the projector. Wait for the Power light to stop flashing, then unplug the power cord.
2.Turn the projector upside down.
3.To clean the intake vent and filter, use a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the vent with a soft brush (such as an artist’s paintbrush).
4.If the dirt is difficult to remove or the filter is broken, replace the filter as described on page 62. Contact your dealer or call Epson at
note
To order replacement air filters, request part number V13H13408. See page 11 for ordering information.
Maintaining the Projector 59