Epson 1810p Using Keystone Correction, Use the, and press Enter, You see this screen:, 24Displaying and Adjusting the Image

You see this screen:

5.Use the pointer button on the remote control (or the arrow buttons on the projector) to select the corner you want to adjust,

and press Enter.

6.Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape.

7.Repeat steps 5 and 6 as needed to adjust any remaining corners.

8.When done, press Menu to exit the menu system.

Using Keystone Correction

The projector automatically corrects vertical keystone distortion when it is tilted within a range of 30° up or down.

Projector tilted up Corrected image Projector tilted down

It takes about one second after projection starts for the image to be corrected. During this time, a vertical keystone correction gauge appears on the screen. If keystone correction isn’t automatically carried out, you may need to turn on the Auto V-Keystonesetting in the projector’s menu system (see page 54).

24Displaying and Adjusting the Image