Epson 1810p Resetting the Lamp Timer, Checking Lamp Usage, Select, Press the, and press, You see this screen:, 4.When you see the prompt, select Yes and press Enter

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the projector’s menus.

1.Press the Menu button on the remote control or on the projector’s control panel. You see the main menu.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter.

You see this screen:

3.Select Reset Lamp Hours and press Enter.

4.When you see the prompt, select Yes and press Enter.5.When you’re finished, press Menu to exit the menu system.

Checking Lamp Usage

To check the number of hours the lamp has been used, press theMenu button and highlight the Info menu. You see a screen like this:

note

The information displayed depends on the input signal currently selected.

Maintaining the Projector 69