3.3.2 Disassembling Paper Support Block Assembly
1. Remove the CSFgear cover. Refer to step 1in Section 3.3.1.
2. Remove the steppingmotor. Refer to steps 2and 3 in the Section 3.3.1.
3. Remove the E-ring fixing theright edge of the paperfeed shaft.
4. Remove 1 gear (29 mm)from the right edge of thepaper feed shaft.
5. Remove the paper feed shaftby pulling ittoward theright side.
6. Remove the CPB tight (3 ×8) screw securing the papersupport shaft tothe right CSFframe, as
shownin the following figure.
Figure 3-43 Removing the E-ring
Gear(29 mm)
Paper Feed Shaft
Figure 3-44 Removing1 Gear (29mm)
CPB tight Screw (3X8)
Paper Support Shaft
Figure 3-45 Removing theCBP Tight (3 x 8) Screw
Disassembly andAssembly FX-2170 Service Manual
3-28 Rev.A