Epson 2170 - page 34

1.3.3 Paper Handling Sequence
In this section, paper handling firmware sequences aredescribed in several cases.
•Printer status Printer ison line (not inthe pausestate).
No PE sensor detects thatpaper is loaded.
Therelea se lever positionis set to continuous paper.
Table 1-34 Paper Handling Sequence1
Occurrence Result
Print command sent Continuous paperis loaded.
button pressed Printer enters pausestate.
button pressed Continuous paperis loaded.
button pressed Continuous paperis loaded.
↑button pressed No operation.
↓button pressed No operation.
Release leverset to Friction The paper path ischanged for cut sheets.
•Printer status The rearPE sensor detects that paper is loaded inthe rear paperpath.
Therelea se lever is set tocontinuous paper.
Table 1-35 Paper Handling Sequence2
Occurrence Result
button pressed The printergoes off or on line.
button pressed The printer performs a linefeed.
button held downcontinuously The printer performs a form feedafter the line
feed.
button pressed Paper is ejected to the rearpaper park position.
button pressed andpaper
advanced to skip area Paper is advanced to the next TOF position.
↑button pressed The printer micro feeds paper forward.
↓button pressed The printer micro feeds paper backward.
Release leverset to Friction The beeper sounds.
Front paper endsensor detects that paperis
loaded in the front paper path. The beeper sounds.
FX-2170 Service Manual Product Description
Rev.A 1-25