•Printer status The front PE sensor detects thatpaper is loaded in thefront paper path.
Therelea se lever is set tocontinuous paper
Table 1-36 Paper Handling Sequence3
Occurrence Result
buttonpressed Printer goesoff or on line.
buttonpressed Printer performsa line feed.
buttonheld down continuously The printer performs a form feedafter the line
feed.
buttonpressed Paper is ejected to the front paperpark position
buttonpressed and the paperwas
advanced to skip area Paper is advanced to the next TOF position.
↑buttonpressed The printer micro feeds paper forward.
↓buttonpressed The printer micro feeds paper backward.
Release lever was set to Friction The beeper sounds.
Front paperend sensor detects that paperwas
loaded in therear paperpath. The beeper sounds.
•Printer status Printer ison line ( not inthe pausestate).
No PE sensor detects thatpaper is loaded. ( Theprinter is set to CSF .)
Therelea se lever is set tothe Friction.
Table 1-37 Paper Handling Sequence4
Occurrence Result
Printcommand sent The paper is loaded fromthe CSF.
buttonpressed Printer goes offline.
buttonpressed Paper is loaded fromthe CSF.
buttonpressed Paper is loaded from the CSF.
↑buttonpressed No operation.
↓buttonpressed No operation.
Release lever set to tractorposition The paper path ischanged to tractor.
Rear/ Front paperend sensor detects that
paper is loadedin the rear orfront paper path.
And, 3 seconds havepassed.
The printer feeds paper.
Rear/ Front paperend sensor detects that
paper is loadedin the rear orfront paper path.
And, , LF/FF, or button
was pressed.
Ignored.
Product Description FX-2170 Service Manual
1-26 Rev.A