Click Continue, then read the license agreement and click Agree.

2 If you’re using Mac® OS X, double-click the Mac OS X folder, then double-click the Epson icon.

If you’re using Mac OS 9.x, double-click the Epson icon.

3

4 At the Software Installation screen, click Install. Enter your Macintosh Administrator name and password as necessary during installation.

Click Install

5 Follow the on-screen instructions to install each program. Click Next or Finish (Windows) or Install or Quit (Macintosh) as needed. Note that Epson Smart Panel™ installs in several steps.

6

7

Note: If you’re installing on Macintosh OS 9.x, you may see a prompt to update your Carbon Library. After installing it and restarting your system, double-click the Epson icon, then click Install to continue.

At the end of the installation, click Exit.

At the Product Registration screen, register your scanner as instructed.

Connect the Scanner

After your software is installed, it’s time to connect your scanner.

1 Remove the sticker wrapped around the front of the scanner covering the transportation lock on the bottom.

Caution: Don’t turn the scanner over to access the lock or you may damage the scanner.

2

3

Slide the transportation lock to the unlock position.

Remove the yellow sticker.

Remove sticker

4 Connect the cable for the built-in transparency unit (scanner cover).

5 Plug the square end of the USB cable into the scanner’s USB port. Then plug the flat end into any available USB port on your computer or hub.

Note: Your scanner may not work correctly if you use a USB cable other than the one supplied by Epson or connect it through more than one hub.