Setting Up the Projector 35
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 16) or an
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the
Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video) port on your projector using an
optional component-to-VGA video cable or adapter.
3. You may need to change the Input Signal setting in the
projector’s Signal menu to Auto (see page 68).
4. If you want to play sound through the projector, see page37 for
instructions on connecting an audio cable.
Computer (Component
Video) port
EX31
EX51/EX71 Computer (Component
Video) port