ActionPrinter 3250

Single sheets (Manual

insertion):

 

Width

148 to 257 mm (5.8 to 10.1 inches)

 

92

lo 364 mm (3.6 to 14.3 inches)

Thickness

0.065 to 0.14 mm (0.0026 to 0.0055 inches)

weight

52 to 90 g/m2 (14 to 24 lb)

Continuous paper:

 

 

Width

101 to 254 mm (4 to 10 inches)

Copies

Two sheets (one original plus one copy)

Thickness

0.065 to 0.18 mm (0.0026 to 0.007l inches) total

Weight

52

to 82g/m2 (14 to 22 lb) for one sheet

 

40

to 58g/m2 (12 to 15 lb) per sheet in multi-part

forms

•Use only two-part carbonless multi-part forms and use them only with the optional push tractor.

Note: You can use recycled paper under normal conditions. If you notice increases in ribbon consumption and paper jamming, use a higher grade of paper.

Labels:

Size101 to 254 mm (4 to 10 inches) width for backing sheet

63.5x 23.8 mm (2 1/2 x 1 5/16 inches) minimum for a

label

Continuous paper

AThe minimum top and bottom margins above and below the perforation are

9 mm (0.35 inches).

BThe minimum left and right margins am 13 mm (0.51 inches). The maximum printable width is 203 mm (6 inches).

Thickness0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing sheet

0.16 to 0.19 mm (0.0063 to 0.0075 inches) total

Weight68 g/m2 (17 lb)

l Use continuous type labels only with the optional push tractor.

•Use labels onIy under normal temperature and humidity conditions.

Envelopes:

Size No.6166 x 92 mm (6.5 x 3.6 inches)

No. 10240 x 104 mm (9.4 x 4.1 inches)

Thickness0.16 to 0.48 mm (0.0063 to 0.0197 inches) 45 to 75g/m2 (12 to 20 lb)

•Use envelopes only under normaI temperature and humidity conditions.

•Load enveIopes with the longer side inserted into the rear slot by manual insertion only.

Printable area:

Single sheets (paper cassette and manual insertion) and envelopes

A

printable area

A

The minimum lop margin is 8.5 mm (0.33 inches).

B

The minimum left margin is 3 mm (0.12 inches).

 

The minimum right margin is:

 

3.8 mm (0.15 inches) for the A4-size paper cassette

Mechanical

Paper-feed methods:

MTBF:

Print head life:

Dimensions and weight:

Electrical

120 V model: Bated voltage:

Input voltage range Rated frequency range:

Input frequency range: Rated current:

Power consumption:

Dielectric strength:

220-230 V model: Rated voltage:

Input voltage range:

Rated frequency range: W~Wvw

Power consumption:

Dielectric strength:

240 v model: Rated voltage:

Input voltage range:

Rated frequency range: Input frequency range:

Rated current: Power consumption:

Friction (paper cassette and manual insertion) Push tractor (optional)

Black ribbon cartridge S015032

Life expectancy : 2 million character at 48 dots/character

4000 power-on hours (10% duty)

100 million strokes/wire

Height 130 mm (5.1 inches)

Width 375 mm (14.8 inches)

Depth 252 mm (9.9 inches)

Weight 4.5 kg (10 lb)

AC l20 V

AC 103.5 to 132 V 50 to 60Hz

49.5to 60.5 Hz

1.1A

30 W (during self-test printing in draft mode at

10 cpi)

AC 1 kV rms, 1 second (betwem AC line and chassis)

AC220-230V AC 198 to 244 V 50 to 60 Hz

49.5to 60.5 Hz

0.6A

30 W (during self-test printing in draft mode at

10 cpi)

AC 1.5 kV rms, 1 second (between AC line and

AC 240V

AC 216 to 264V 50 to 60 Hz

49.5to 60.5 Hz

0.6A

30 W (during self-test printing in draft mode at

9.7 mm (0.38 inches) for the letter-size paper cassette
3 mm (0.12 inches) for manual insertion

However, the maximum printable width is 203 mm (8 inches).

C The minimum bottom margin is 13.5 mm (0.53 inches).

Dielectric strength:

AP-3250-23 / 1 7 / 9 2

24-Pin Printers