Epson 4450 instruction manual Working with templates continued, Tips on using templates

Working with templates continued

Diagram 1

If your image does not fit the power clip correctly first time, right click on the image and choose 'Edit Contents' from the drop down menu (diagram 1). You can also click on Effects > Power Clip > Edit Contents. Drag the image (you will see the image and the template on the screen) until you have it in the right place. You can even re-size the object in the 'Edit' state. When you are happy with the image placement, right click and choose 'Finish Editing This Level', from the drop down menu. You can also access this by clicking on Effects > Power Clip > Finish Editing This Level.

Your image is now ready to print. Refer to page 4 on printing with the .ICC colour profile.

Tips on using templates

All Xpres Sublimation templates are slightly larger than the actual substrate. You can leave the border of the template visible as this helps to line up the substrate before taping it onto the transfer paper (use XP6006 Heat Tape to secure the substrate to the transfer paper).

The only template you cannot leave the border on is the mug template as this will show up when printed.

To duplicate your image once fitted to the template refer to page 10 on duplicating objects

Sublimation paper usage and tips

XP4072a (A4) & XP4073a (A3) XP4047 (A3+) is used for all hard surface and fabric substrates.

Print onto the bright white side only.

7