Epson EL 486UC+
External cache jumper settings* | Video memory configuration | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*If you have no external cache installed, the position of these jumpers does not matter.
Processor type jumper setting
| J21 | J22 |
486DX, DX2 | ||
486SX | Off |
SIMM Installation
Your computer comes with 4MB of memory on a SIMM. You can increase the memory up to 64MB by installing 1MB, 2MB, 4MB, 8MB, 16MB, and 32MB (when available) SIMMs in the computer’s two SIMM sockets. The following table shows the possible SIMM configurations; any SIMM can be installed in eitherbank.
Sample SlMM configurationsUse only
* Standard video memory
Video resolutions and colorsExternal Cache
You can install 64KB, 128KB, or 256KB of external cache on the EL 486UC+.c3 To install 64KB of external cache, use eight SRAM,
0To install 128KB of external cache, use four SRAM,
PTo install 256KB of external cache, use eight SRAM,
For the cache memory to work properly, you must install chips in the following configuration (each bank contains four cache memory sockets).
Microprocessor Upgrades
The computer’s processor can be upgraded by replacing the existing microprocessor with a faster one. You can either purchase an upgrade kit from Epson or buy the individual components separately, as listed in the following table.
Microprocessor upgrade componentsVideo Memory
The EL 486UC+ comes with 512KB of video memory |
|
installed on the main system board. You can increase the |
|
video memory to 1MB by installing four additional DRAM, |
|
* For the SX/25, SX/33, and DX/33 processors |
Epson EL | 12/1/93 |