Start Here

Epson® Perfection® 4990 Pro

Unpack Your Scanner

1Make sure you have all the parts shown below for your Epson scanner:

Scanner

CD-ROM with EPSON Scan driver, software, and electronic manuals

Adobe® Photoshop®

Elements CD-ROM

LaserSoft ImagingTM SilverFast® Ai CD-ROM

ArcSoft® Software Suite

CD-ROM

MonacoEZcolorTM

CD-ROM

Scanner cover/ transparency unit

Document mat

Film holders

Film area guide

USB cable

Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire® or iLinkTM), you’ll need to purchase an IEEE 1394 cable (not included).

2Remove all the packing tape, but leave the large sticker in place until you are instructed to remove it.

IMPORTANT! Leave the sticker in place until you are instructed to remove it

3 Insert the hinges on the cover into the square holes at the back of the scanner.

4 Slide the transportation lock to the unlocked position.

5Attach the document mat. Hold the top

of the document mat and slide it down gently along the document cover. Make sure the tabs on the bottom and sides of the document mat fit in the slots on the document cover.

6 Close the cover.

CPD-18893

Printed in XXXXXX XX.XX-XX XXX