Making Detailed Adjustments 41
■Gamma
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas. See page 31 for
more information.
■Color Gamut
Note: The Color Gamut setting can only be used when the Color Mode is set to THX (see
page 28).
You can select from three different color gamut settings according to the source material
and locale. Select SMPTE-C for standard definition (USA, Canada, and other regions
using NTSC), EBU (PAL) for Europe, or HDTV (all regions).
3D Setup
Use the options in the 3D Setup menu to adjust 3D brightness, the 3D display format and
other 3D settings.
Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images aren’t
displaying correctly. Changing these settings unnecessarily may cause problems with 3D
projection.
■3D Display
Enables or disables 3D mode. You can also change this setting by pressing the 2D/3D
button on the remote control.
■2D-to-3D Conversion
Enable this setting to convert 2D images into 3D content.
Image> Advanced > Gamma
Image> Advanced > Color Gamut
Signal> 3D Setup > 3D Display
Signal> 3D Setup > 2D-to-3D Conversion