Maintenance 61
8. Insert the outer edge of the air filter cover into the notches on the projector, then press in
on the inner edge of the cover to lock it into place, as shown below.
Replacing the Lamp
The projection lamp lasts for up to 4000 hours in Normal mode. You can use the Info menu
to check how long it’s been in use (see page64). It’s time to replace the lamp when:
■The projected image gets darker or starts to deteriorate.
■The projector’s lamp light flashes orange or red at half-second intervals.
■The message Replace the lamp appears on the screen when you start projecting.
Note: Lamp life results will vary depending on mode selected, environmental conditions, and
usage.
Turn off this product when not in use to prolong the life of the projector.
You can purchase lamp part number V13H010L69 from an authorized Epson reseller. To
find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online,
visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Be sure to read the “Important Safety Information” on page 80 before replacing the lamp.
Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the
lamp has broken, small glass fragments may be present and should be removed carefully to avoid
injury.
Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left
by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.