Power light Status light Lamp light Temp light Status and solution
Off Flashing blue Orange Off Lamp has a problem
• Check the Lamp Hours in the Info
menu to see if the lamp is burned
out. Wait for the lamp to cool down,
and then remove it to see if it is
broken or installed incorrectly;
reseat or replace the lamp as
necessary
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Flashing blue Varies Flashing Off Replace the lamp soon to avoid
orange damage; do not continue using the
projector
Off Flashing blue Off Flashing A fan or sensor has a problem; turn
orange the projector off, unplug it, and
contact Epson for help
Off Flashing blue Flashing Flashing Auto Iris error; turn the projector off,
orange orange unplug it, and contact Epson for help
Off Flashing blue Orange Orange Power error; turn the projector off,
unplug it, and contact Epson for help
Off Flashing blue Flashing Off Internal projector error; turn the
orange projector off, unplug it, and contact
Epson for help
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
101