Adjusting the Sound and Audio Modes

You can switch between stereo sound and virtual surround sound and select from several audio modes, depending on the type of movie (or music) you’re playing.

1.To display the sound mode, press the button on the remote control. You see the current setting displayed on the screen.

2.To switch between Stereo and Dolby VS (virtual surround sound), press again.

3.To change the audio mode, press . You see the current setting displayed on the screen.

4.Continue pressing to select the mode you want: Concert, Drama, Action, or Sci-Fi.

For audio CDs, the modes are: Classic, Jazz, Rock, and Digital.

Listening with Headphones

Connect headphones as shown below:

After you connect headphones, you no longer hear any sound from the built-in speakers. However, you can still adjust the volume to the headphones using MovieMate’s volume controls on the control panel or remote control.

Warning: Make sure the volume is not set too high, especially when you first plug in the headphones. Listening to high volume sounds over an extended period can damage your hearing. Sudden high volume can also damage your headphones.

20 Playing Movies