Epson 50 The colors on the screen don’t look right, The picture is wider at the top or bottom, The picture is taller on the left or right side, Subtitles do not appear

■If the picture looks darker than it used to, you may need to replace the lamp. See page 44.

The colors on the screen don’t look right.

■ Press the	button on the remote control to select the best setting for your viewing
environment.

■Adjust the Color Saturation or Tint settings. See page 37.

■If you’re using external video equipment, check the solutions on page 54.

The picture is wider at the top or bottom.

■You’ve tilted MovieMate to raise or lower the image, causing it to become “keystoned.”

Use the or buttons on the control panel or remote control to correct the problem.

The picture is taller on the left or right side.

MovieMate is set at an angle to the screen. Face it squarely toward the screen.

There is no sound, or the sound is not loud enough.

■Try pressing the + Volume button on MovieMate or on the remote control.

■Press the button on the remote control to make sure the sound hasn’t been turned off temporarily.

■If you’re using external video equipment, make sure you connected the red and white audio jacks to MovieMate’s audio ports (see page 21).

■If you’re using external equipment, you may need to adjust the Audio settings in the setup menu (see page 39).

There is a problem with the sound quality.

■Try pressing the button on the remote control and adjusting the sound mode.

■If you’re using external equipment, you may need to adjust the Audio settings in the setup menu (see page 39).

Subtitles do not appear.

■The DVD might not include subtitles.

■Make sure the subtitle language is not set to OFF (see page 32).

Problem Solving 53