6. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp assembly.
7.To replace the lamp cover, slide it into position, then tighten the screw. (MovieMate won’t work if the lamp cover is loose.)
8.After replacing the lamp, you need to reset the lamp timer, as described in the next section.
Resetting the Lamp Timer
1.Connect the power cable and press the 
button to turn MovieMate on.
2.Press 
on the remote control. You see the Visual Setup menu.
3.Press 
to highlight Info, then press 
to select it.
4.Press 
again. You see the following on the screen:
5. Select Yes and press 
to reset the timer.
46 Caring for Your Epson MovieMate