Epson 52 manual Connecting to a Video Source, Projecting Composite Video Images

Connecting to a Video Source

Caution :

When connecting the projector to other video sources, take the following precautions.

•Turn off the power for both the projector and the video source before connecting them. If the power for either device is on at the time of connection, damage may result.

•Check the shapes of the cable connectors and the device ports before making the connections. If you try to force a connector to fit a device port with a different shape or number of terminals, a malfunction or damage to the connector or port may result.

Projecting Composite Video Images

Use a RCA video cable (commercially-available) to connect the video source to the Video port on the left side of the projector.

To video output port (yellow)

To Video port

RCA video cable

(commercially-available)

Tip :

If more than one external component is connected to the projector, use the [Source] button on the projector's control panel or the [S-Video/Video] button on the remote control to select the Video port as the input source. (p.30)

21