Turning On the Projector
Turn on the power to start projecting images.
Caution :
Be sure to read the separate Safety
Connecting the Power Cable
Procedure
1 Check that the power is turned off for the projector and all components connected to the projector.
2 Connect the computer or other video source to the projector. (p.17, 21)
3 Remove the lens cover.
4 Connect the accessory power cable to the projector.
Check that the power cable connector is facing the same way as the power inlet on the projector, and then insert the power cable connector securely into the projector.
5 | Connect the other end of the power | Lit orange | |
| cable to an earthed electrical outlet. |
|
|
Wait until the Power indicator lights orange.
Tip :
The projector's control panel and remote control buttons cannot be operated while the Power indicator is flashing orange.
28
