Epson 5300, 7300, 7250 Epson Installation, Configuration and Connections, Page

Epson Installation Configuration and Connections

10.Power on the projector with either the remote control or by pressing the projector’s power button.

11.Press the projector’s Menu button, then select Options and enter this selection.

12.Select Mouse/Com 1, then select BNC Format RGB and enter this selection.

_ When the projector and switcher are communicating with each other, there will be a delay of 30 to 60 seconds when powering the projector on/off using the System 8/10 Plus.

Epson 5300/7300 Projector Connections

Use the illustration below when connecting the System 8/10 PLUS to an Epson 5300/7300 projector. Refer to Epson documentation to continue the installation.

9-Pin		See note
Male	Comm	below
"I"	Adapter
	26-484-01
3, 4 or 5 BNC	"I"
9-Pin
	CC 50'
	15-Pin HD

_	You cannot input S-video and Composite video sources simultaneously
_	If the installation includes looping (master/slave) switchers, see Chapter 5.
	If Video Loop Back is part of the installation, see pages 2-10 and 2-11.

Extron • System 8/10 PLUS • User’s Manual • P/N 68-424-01 Rev. D Page 3