■Brightness/Contrast
Picture Æ Input Adjustment Æ Brightness/Contrast
Note: If you cannot access the Brightness and Contrast settings, highlight Input Adjustment and press the 
Select button, then choose Brightness/Contrast in the
Adjust the brightness so it’s suitable for your viewing conditions. For example, if you’re projecting in a brightly lit room or onto an especially large screen, you may need to increase the brightness. Decrease the brightness for dark rooms or small screens; this also reduces power consumption and fan noise, and helps to prolong the life of the lamp.
■White Level/Black Level
Picture Æ Input Adjustment Æ White Level/Black Level
Note: If you cannot access the White Level and Black Level settings, highlight Input Adjustment and press the 
Select button, then choose White Level/Black Level in the
Adjust the White Level so that details in the brightest parts of the image are not washed out. Then adjust the Black Level so that
■Auto Iris
Picture Æ Auto Iris
When this setting is on, the amount of light produced by the lamp is automatically adjusted according to the brightness of the image. The setting is stored separately for each image source and color mode.
■Setup Level
Image Æ Advanced Æ Setup Level
This setting adjusts the threshold at which dark areas of the image are rendered black (0 IRE). For compatibility with most video equipment sold in the United States, leave this setting at 0%. Check your video equipment’s specifications to be sure of the correct setting.
■EPSON Super White
Image Æ Advanced Æ EPSON Super White
Note: This setting can be used only when the Color Mode is set to Natural, Theatre, or Theatre Black 1 or 2 (see page 28).
If bright parts of the image are washed out or overexposed (when the input signal contains values over 100 IRE), turn this setting on to compensate. When this setting is turned on, the projector disregards the
36 Making Detailed Adjustments