Replacing the Lamp
The projection lamp lasts for up to 3000 hours. You can use the Info menu to check how long it’s been in use (see page 53). It’s time to replace the lamp when:
■The projected image gets darker or starts to deteriorate.
■The projector’s warning light flashes red at
■The message Replace the lamp appears on the screen when you start projecting.
Warning light
Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.
Purchase lamp part number V13H010L35 from an authorized Epson reseller. To find the nearest reseller, please call
Be sure to read the “Important Safety Information” on page 69 before replacing the lamp.
Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury.
Caution: Never touch the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Follow these steps to replace the lamp:
1.Press the P Power button and wait for the light to stop flashing.
2.Turn off the power switch on the back of the projector.
3.Unplug the power cord and any cables.
4.Wait for one hour to make sure the lamp is no longer hot.
50 Maintenance