EPSON PhotoPC 700

Removing a Storage Card

Make sure the camera and the LCD screen are turned off. Then follow these steps:

1.Open the cover and slide the switch on the bottom of the camera to eject the card.

2

1

2. Remove the card by hand, then close the card slot cover.

CAUTION

Never remove the card while the camera is accessing it. Data in the card may be lost or damaged. Avoid using or storing the card in dusty places, in direct sunlight, or in places that are extremely hot or humid.

Using a PCMCIA Adapter

Follow these steps to use an adapter:

1.Insert the storage card all the way into the adapter, as shown below:

2.Insert the adapter into your computer’s Type II PCMCIA slot:

Printing Directly from the Camera

Your PhotoPC 700 lets you print directly to any of the following ink jet printers:

❏EPSON Stylus® Photo

❏EPSON Stylus Photo 700

❏EPSON Stylus Photo EX

❏EPSON Stylus COLOR 600

❏EPSON Stylus COLOR 800

❏EPSON Stylus COLOR 850

You can print with EPSON ink jet media, including coated or glossy paper, glossy film, ink jet cards, and photo stickers. Direct Print allows you to print in various layouts, including the following:

❏Full size or 5 × 7 images

❏Cards

❏Album images

❏Stickers

❏Contact prints

Before you start, make sure you have the standard Macintosh printer cable (Apple System Serial-8 cable) that came with your camera. Don’t use the PC connection cable or Macintosh adapter cable. Then, follow these steps to connect your camera to the printer:

1.Make sure both the camera and printer are turned off.

2.Connect either end of the interface cable to the serial

connector on the back of the printer.

.

3. Open the connector cover on the side of the camera.

5/98

EPSON PhotoPC 700 - 9