Epson PowerLite 732c Projector

Power

Lamp

Temperature

 

light

light

light

Description

 

 

 

 

Red

Off

Red

The projector has overheated

 

 

 

and turned itself off. Let it

 

 

 

cool for about five minutes,

 

 

 

then turn it back on. Make

 

 

 

sure there is plenty of space

 

 

 

around and under the

 

 

 

projector for ventilation. Also

 

 

 

clean the air filter and air

 

 

 

exhaust vents. If it continues

 

 

 

to overheat, you may need to

 

 

 

replace the air filter.

 

 

 

 

Flashing

Off

Flashing

The projector is too hot.

red

 

orange

Make sure the room is not

 

 

 

above 95 °F and there is

 

 

 

plenty of space around and

 

 

 

under the projector for

 

 

 

ventilation. Clean the air filter

 

 

 

and air vents, if necessary.

 

 

 

 

Orange

Off

Off

The projector is in standby or

 

 

 

sleep mode. You can unplug

 

 

 

it or press the P Power

 

 

 

button to turn it on.

 

 

 

 

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

❏Use a canister of compressed air to remove dust.

❏To remove dirt or smears on the lens, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens.

Caution:

Do not use glass cleaner to clean the lens.

Cleaning the Projector Case

Before you clean the case, first turn off the projector and unplug the power cord.

❏To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

❏To remove stubborn dirt or stains, wipe the case with a soft cloth moistened with a mild detergent.

Caution:

Do not use wax, alcohol, benzene, paint thinner, or other chemical detergents. These can damage the case.

Cleaning and Replacing the Air Filter

Clean the air filter and air vents on the bottom of the projector after every 100 hours of use. If not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector.

Follow these steps:

1.Turn off the projector, allow it to cool down, and unplug the power cord.

2.Turn the projector upside down.

Use a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, use a very soft brush (such as an artist’s brush).

If dirt is difficult to remove or the filter is torn, replace it. The air filter set (part number V13H134A08) contains two filters. Contact your dealer or call Epson at (800) 873-7766 to obtain a new set. In Canada, please call (800) 463-7766 to locate a dealer.

Note:

When you get a replacement lamp for your projector, a new air filter is included. Replace the filter when you replace the lamp.

3. If you need to replace the filter, slide it off as shown.

4. Slide the new air filter until it clicks in place.

2/05

Epson PowerLite 732c Projector - 11