
Epson PowerLite 732c Projector
Zooming Your Image
Follow these steps to zoom in on a portion of the image:
1.Press the button on the remote control. You see a crosshair indicating the center of the
2.Use the pointer button to position the crosshair in the area you want to enlarge.
3.Continue pressing the button to enlarge the selected area up to 4 times.
4.While the image is enlarged, you can:
❏Use the pointer button to move around the screen.
❏Press the button to zoom out.
5.When you’re done, press the Esc button to return the image to its original size.
Using the Remote Control as a Wireless Mouse
When you use the remote control as a wireless mouse, you can control your computer or click through
Page up or | Move the pointer |
page down |
|
❏To
❏To click and drag, press and hold the Enter button and use the pointer button to move the pointer, then release the Enter button.
Replacing the Batteries
Caution:
When replacing batteries, take the following precautions:
❏Replace the batteries as soon as they run out. If a battery leaks, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.
❏Do not expose batteries to heat or flame.
❏Dispose of used batteries according to local regulations.
❏Remove the batteries if you won’t be using the projector for a long time.
Follow these steps to replace the AAA alkaline batteries:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
|
Display the pointer
❏To advance slides in a PowerPoint presentation in Slide Show mode, press the Page Up or Enter button on the remote control. Press the Page Down or Esc button to go back a slide.
❏To display the mouse pointer, press the Pointer button.
❏To move the pointer on the screen, aim the remote at the screen and use the pointer button.
❏To click (or
❏To
3. Replace the battery cover. (It should snap into place.)
8 - Epson PowerLite 732c Projector | 2/05 |