Epson PowerLite 737c Projector

6. Select the appropriate settings for your mode:

ESSID

Ad hoc: Enter an ESSID in the ESSID

 

textbox.

 

Access point: Enter an ESSID, which

 

is the SSID name of your access point

 

or the name of your AirPort network.

 

(The name of your AirPort network

 

may be different from that of your

 

AirPort base station; select your base

 

station in the AirPort Admin utility and

 

click Configure to check the name of

 

your network.)

 

Note that the ESSID is case-sensitive.

 

 

Password for WEB

If you want to create a password for

control

an internal web page, you can enter

 

up to 8 alphanumeric characters.

 

 

Projector keyword

Turn this option on if you want to set

 

up a security keyword so that only

 

people in the same room as the

 

projector can access it. When you

 

connect to the projector wirelessly, it

 

displays a four-digit randomized

 

keyword on the screen that you need

 

to enter when prompted.

 

 

DHCP (access point

If your access point assigns IP

mode only)

addresses automatically, turn this

 

option on. Otherwise, turn it off and

 

assign an IP address, subnet mask,

 

and gateway address manually.

 

 

IP address (access

Enter the IP address you want to

point mode only)

assign the projector. It must be

 

formatted like other addresses on the

 

network; usually the first three

 

sections match the access point’s IP

 

address. The last section should be

 

unique.

 

 

Subnet mask.

Enter a subnet mask formatted like

(access point mode

other subnet masks on your network.

only)

 

 

 

Gateway address

Enter the IP address that was

(access point mode

assigned to your access point or

only)

AirPort base station when it was set

 

up. If you don’t know the address, see

 

“Checking the Gateway (Access

 

Point’s) IP Address” on page 14.

 

 

7.When done making settings, highlight the OK button at the top of the screen. Then press Enter. Highlight the OK button again and press Enter to return to the main EasyMP Network Screen.

Configuring the Network Settings for Windows

Before connecting to the projector wirelessly, make sure your computer is configured correctly. Also, make sure that the Internet Connection Firewall is disabled. (See your Windows online help system for details.)

Note:

Depending on your computer’s wireless network adapter card, the dialog boxes you see may be different than those shown in this section.

1.Access your wireless network Properties window. For example, in Windows XP click Start > Control Panel > Network and Internet Connections. Then double-click the Network Connections icon. You see a screen similar to this:

Right-click and select Properties

2.Right-click the Wireless Network Connection icon and select Properties. You see a screen like this:

Click here

12 - Epson PowerLite 737c Projector

2/05