EPSON PowerLite 7800p Projector
When you finish changing an address in the network menu, press the Enter button (on the remote control) or the
Auto/Enter button (on the projector). This stores the value.
6.When you’re done making all necessary changes, press ESC to exit the menu system.
Opening and Closing EMP Monitor
To start EMP Monitor, click Start > Programs or All
Programs > EPSON Projector > EMP Monitor.
If you’ve added the program to the Startup programs folder, it may already be open. If so, click the icon in the system tray on the
Click here to start EMP Monitor
To close EMP Monitor,
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it. Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click Register projector. You see this screen:
Click here
3.Click Auto detect to locate projectors currently operating on the network. Or click Manual registration and enter the projector’s name and network address.
Note: If Auto detect fails to find the projector, your projector may not be connected or configured correctly for the network.
Any projectors found on the network are listed:
Click here
4.Select each projector you want to add by clicking its name and clicking Add. When you’re done, click Close.
You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the projector name, and click Delete.
5.Click Close. You see the status of each of your registered projectors on the main EMP Monitor screen:
14 - EPSON PowerLite 7800p Projector | 5/03 |