EPSON PowerLite 7800p Projector

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. This lets you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs.

 

 

 

 

 

 

 

 

 

 

 

 

Status icon

Video Source icon

 

Error icon

 

Note: To monitor a projector when it’s in standby mode (plugged in but not projecting), you must first select Network ON as the Standby Mode setting in the projector’s Advanced1 menu. You can monitor up to 64 projectors.

For detailed status information, select the projector and click View details.

The following tables explain the status, video source, and error icons.

Status icons

(green)

Projecting; no problems

 

 

 

 

 

 

(dark)

Turned off; no problems

 

 

 

 

 

 

(green)

Projecting; problems detected

 

 

 

 

 

 

(dark)

Turned off; problems detected

 

 

 

 

 

 

 

Network error (for example, not connected to

 

 

network or power cable disconnected).

 

 

You may also see this error if Network OFF is

 

 

selected in Standby Mode.

 

 

 

 

Video source icons

 

 

 

 

 

 

Computer

 

BNC

S-Video

Video source icons

Video

DVI

Error icons

Lamp replacement notification (the lamp is nearing the end of its life; see page 19)

High-speed cooling in progress (the projector is getting too hot but continues to operate)

Overheating (projection turned off automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Internal problem

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor screen let you turn the projectors on and off and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you’ve selected the projector(s) you want to operate before clicking one of the buttons.

Control buttons

Note: To turn on a projector when it’s in standby mode (plugged in but not projecting), you first select Network ON as the Standby Mode setting in the projector’s Advanced1 menu.

5/03

EPSON PowerLite 7800p Projector - 15