15
R4C649_UK
short.bk Rev.C
Daily_UK.fm A5 size
12/1/00
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
E.Lipsett
English
cCaution:
❏You must remove the yellow tape seal from the cartridge
before installing it; otherwise, the cartridge will become
unusable and you will be unable to print.
❏Do not remove the tape seal from the bottom of the
cartridge; otherwise, ink will leak.
❏Do not touch the green IC chip on the side of the
cartridge; otherwise, normal operation and printing
may not be possible.
❏Do not remove the green IC chip from the side of the
cartridge. If you install an ink cartridge without an IC
chip, the printer may be damaged.
5. Align the tabs on the ink cartridge so that they are resting on
the tabs protruding from the base of the opened ink cartridge
clamp. Push the clamps down until they lock firmly into place.
cCaution:
❏Make sure that the ink cartridge tabs are not under the
hinges protruding from the base of the opened ink
cartridge clamp, as this could damage the clamp.
❏After you remove an ink cartridge from the printer,
please insert a new one immediately. If no cartridge is
present, the print head may dry out and become unable
to print.
6. Press the e ink cartridge replacement button. The printer
moves the print head and begins charging the ink delivery
system. This process takes about one minute to complete.
When the ink charging process is finished, the printer returns
the print head to its home position, the Ppower light stops
flashing and remains on and the berror light goes out.
cCaution:
The Ppower light continues to flash while the printer is
charging ink. Never turn off the printer while this light is
flashing. Doing so can result in incomplete charging of ink.
7. Close the printer cover.