Epson PowerLite Pro Cinema 800
5.Loosen the two screws securing the lamp (they don’t come all the way out).
Optional Accessories
Epson provides the following optional accessories:
Product | Part number |
|
|
Replacement lamp (ELPLP35) | V13H010L35 |
|
|
Air filter replacement (ELPAF09) | V13H134A09 |
|
|
Kensington security lock | ELPSL01 |
|
|
ELPSV01 | |
|
|
Component video cable | ELPKC19 |
|
|
6. Grasp the lamp as shown and pull it straight out.
Warning: 
The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
7.Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.
8.Replace the cover. (The projector won’t work if the lamp cover is open or loose.)
9.Reset the lamp usage timer, as described in the next section.
You can purchase accessories from an authorized Epson reseller. To find the nearest reseller, call
In the U.S., you can also purchase online at
www.epsonstore.com.
In Canada, you can also purchase at www.epson.ca or (800)
Related Documentation
EPSON PowerLite Pro Cinema 800 | |
| User’s Guide |
CPD- 20729 | EPSON Extra CareSM |
| Service warranty |
Note: Setup instructions are provided in the User’s Guide. There is no setup sheet.
Resetting the Lamp Timer
After installing a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used.
1.Press the Menu button on the projector or remote control.
2.Use the menu navigation buttons to open the Reset menu, then select Reset Lamp Hours.
3.When you see a confirmation prompt, highlight Yes and press the 
Select button.
4.When you’re finished, press the Menu button to exit.
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.
10 - Epson PowerLite Pro Cinema 800 | 11/05 |