The included projector mount lets you attach the projector to the wall or ceiling in the location that works best for your room.
Follow the instructions included with the mount to install the projector, which weighs
11.5pounds. The wall or ceiling where you install it must be capable of supporting a weight of 58 pounds.
In addition to the tools supplied with the projector mount, you will need a Phillips head screwdriver and a drill to use on the wall or ceiling.
If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:
1. | Press the Menu button on the remote control. |
|
2. | Press the menu navigation buttons to open the |
|
| Settings menu, then select Projection. | Menu |
3. | Use the navigation buttons to select Front/Ceiling. | button |
| ||
4. | Press the Menu button when done. |
|
If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 67.
Menu navigation buttons
Setting Up the Projector 17